Page cover

DMC Installation

Installation guide for DEXAIM Device Memory Controller or 'DMC' exploit.

LogoCustom FirmwareDEXAIM DMA
Shop our custom 1:1 fully emulated firmware for EAC, BE, ACE, VGK and more.

On the DMA PC

1

Prepare the modified LeechCore.dll

  • download the modified LeechCore .dll

  • place the .dll file into the same directory as the cheat you plan to use

  • run the cheat loader

2

Prepare the exploit

  • press the INS key

  • input your license key in the text field

  • click the left checkbox to save your license key on each launch

  • click the right checkbox to automatically login on each launch

  • click the bottom left button, input the GAMING PC's (internal) IPv4 address

  • it will prompt you to enter your license key again

On the GAMING PC

1

Build, download, and install the driver

  • click Verify & Build

  • install the driver (run the file as administrator)

2

Enter BIOS

  • Press Start -> type cmd -> type shutdown /r /fw press ENTER

    • this will reboot the PC and enter the BIOS

    • if it does not, choose the UEFI Firmware Settings to enter BIOS

Choose the UEFI Firmware Settings option.
3

Disable Secure Boot

  • Locate the setting named Secure Boot, typically located in Advanced or Boot menus

  • Disable Secure Boot

    • sometimes, Secure Boot may have boot keys or secure keys; you can (in most cases) delete these keys, and then disable secure boot

    • you cannot disable secure boot with keys active; you must delete them first to modify the secure boot state

Example of the ASUS BIOS.
4

Finishing up in BIOS

  • Save changes and exit BIOS (typically, press F10 to save changes & reboot)

  • Reboot the PC

5

Run the driver

  • run the driver file as administrator

On the DMA PC

1

Run the cheat again

  • open the cheat loader again

Success! You should be able to connect and use the cheat normally.

The driver will unload itself on each reboot. You will need to run the driver again manually each boot.

Last updated

Was this helpful?