Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Troubleshooting

Having issues with your DMA card? Find common issues and solutions here.

ESP visuals incorrectly scaled/not aligned

  • verify the display resolution matches on both PCs

  • verify the display refresh rate matches on both PCs

ESP visuals laggy, stuttering, delayed

  • verify the display refresh rate matches on both PCs

  • disable AI frame generation methods (DLSS, etc.)

  • disable vsync

  • ensure both PCs meet the recommended minimum system requirements for the DMA card/DMA cheat software/fuser

Flea Power Drain/Cold Boot

This will resolve most issues with your DMA card.

  • Shutdown BOTH PCs

  • Unplug the power cable from BOTH PCs

  • Wait 60 seconds

  • Press and/or hold the power button on BOTH PCs to ensure all power is drained from the PC and no LEDs remain lit

[FAIL] VMM INIT FAILED.

The DMA card and/or USB connection is stuck, often due to a fast reboot or system waking from sleep.

[FAIL] VMM INIT FAILED.

FPGA: ERROR: Unable to connect to USB/FT601 device

The FTDI driver is not installed or incorrect DMA card port used.

  • verify the DMA PC has the latest drivers installed from

  • verify the USB port being used on the DMA card is the DATA port

Failed to retrieve Physical Memory Map

Unstable or faulty USB connection.

[SYMBOL] Offline symbols unavailable - file 'info.db' not found

PCILeech cannot retrieve symbol data for memory interpretation.

FPGA: TINY PCIe TLP Algorithm auto-selected

The DMA card is running at slower speeds due to poor USB connection or firmware.

  • Reseat the USB cable on both ends (DMA PC and GAMING PC)

  • Try a different available USB 3.2 (or better) port on the DMA PC

  • Re-flash the card's firmware

    • sometimes, re-flashing the same firmware will not resolve this. To validate the card is not experiencing issues:

      • flash a test/diagnostic firmware

      • run a test on the card using the test tool

      • verify the card tests OK

      • re-flash your firmware

      • test again, verify the card tests OK

[CORE] Initialization Failed. Unable to locate valid DTB / auto-identify OS

Incorrect BIOS settings or unstable USB link.

FTDI SuperSpeed-FIFO Bridge

  • verify the DMA PC has the latest drivers installed from

  • verify the USB slot being used on the DMA PC is at least USB 3.2 or better

  • manually uninstall the FTDI SuperSpeed-FIFO Bridge device in device manager

    • right click -> uninstall device

    • click Action menu -> scan for hardware changes

    • validate the device shows correctly in device manager

  • verify the GAMING PC is fully updated and no Windows updates are pending

Last updated

Was this helpful?