Ctrlk
For the complete documentation index, see llms.txt. This page is also available as Markdown.

AI ✕ DEXAIMDMA

AI, our exclusively built vision software for use on console & PC.

Shop AI

LogoAI ✕ DEXAIMDMADEXAIM DMA

Setting up the Loader

1

Using the Loader

  • download the loader from your order

  • run the loader and create an account, register, etc.

When renewing a license key, do not create a new account. Use the refill button on the loader.

2

On the DMA PC

  • ensure your HID is working (Ferrum, MAKCU, etc.)

  • if using a capture card, ensure it is working

    • follow Capture Card guide below

  • if not using a capture card, ensure both devices (PC + PC or PC + console) are on the same network (same LAN)

    • follow OBS Capture guide below

Using a Capture Card

If you are using a capture card for a simple setup or console, use these instructions.

Requirements

Install software onto the DMA PC.

On the GAMING PC

Choose between Passthrough mode or Duplicate mode.

Passthrough mode

1

Connect cabling

  • GAMING PC/CONSOLE HDMI → capture card IN → capture card OUT → monitor HDMI

2

Set refresh rate

Duplicate mode

1

Set refresh rate

2

Set duplicate mode

  • in display settings → set monitor & capture displays on duplicate mode

  • ensure second monitor is at 1920x1080@240Hz (or maximum possible refresh rate Hz)

Using OBS Capture

If not using a capture card, follow the OBS Capture guide.

On the GAMING PC

1

Download software

2

Run OBS Studio

  • File → Settings → Video

  • Adjust Output Resolution:

    • Base (Canvas) Resolution → Use the game's exact resolution

    • Output (Scaled) Resolution → Use the game's exact resolution

  • Set FPS:

    • Choose Fractional FPS Value

    • Set preferred FPS (240 Recommended)

Make sure the in-game FPS is not lower than OBS' set FPS

3

Load script

  • OBS Studio → Tools → Scripts

  • Click Load.

  • Enter your license key

  • Set the Target IP to the IPV4 of your DMA PC.

  • Enable active.

Windows key → type cmd → type ipconfig on the DMA PC if you do not know the IPv4 address.

  • If it is your first time with UDP, leave it at that.

  • Hit Validate license and it should say VALID.

4

Add capture

  • Go to OBS → Sources → Add → Game Capture and double click.

  • Scroll down and Choose Hook Rate → Fastest.

  • Select Anti-Cheat Compatibility Hook → On.

  • Start your game and tab into it.

  • Tab back and verify OBS is capturing your game. Ideally, use mode: Capture Specific Window and choose your game process.

  • If the game capture is not covering the scene exactly, or it is not centered, Hit CTRL + R and then CTRL + D.

Injection

Once you are done with all previous steps, proceed here.

On the DMA PC

  • Run the loader, login, click Load

If you are prompted to enter IP, enter the IP & PORT & GUID from your HID (Ferrum, MAKCU, etc.) device's software.

  • Click the aim tab: Enter the IN-GAME SENSITIVITY, GAME MONITOR RESOLUTION, GAME RESOLUTION.

  • Click the detection tab and choose model & hardware.

    • If the PC has a dedicated GPU, choose GPU.

  • In the same tab, choose your method of capture. If using a capture card, always use GameMonitorResolution@GameMonitorHz@NV12

    • Put the correct resolution and Hz you see on GAMING PC/CONSOLE's display settings

  • It should say: Capturing

FPS should be stable. If frames (FPS) are dropping, the network and/or capture card is causing performance issues.

Testing

Verify the stability of the AI aimbot before using it live.

  • Go to the Debug tab

  • Enable Debug mode.

  • In the game, go into practice range/target range/a match and aim at a target.

  • Check if the target is recognized in the debug output,

  • Check if aimkey held: true shows when holding the aimkey

  • Check if mouse movement sent when clicking the testing button

  • Check Inference milliseonds (ms). If higher than 5ms to 10ms, the DMA PC is bottlenecking.

Setup complete.

Enhancement Guide

Experiencing FPS drops or other hardware issues/bottlenecks?

OBS Capture Changes

  • Connect both PC's to the router via LAN, will always have less latency than WI-FI

  • Make sure your routers LAN ports are capable of 1 gigabit or more.

  • Make sure your cables are CAT-6 or above. CAT-5E will do but more is always better in life.

  • Don't have a way to reach your router with LAN cables? buy a gigabit network switch. Lowest latency is on network switches. You can also directly connect your PC's with ETH -> ETH

  • Make sure your GAMING PC GPU is capable of handling OBS and your game at high enough FPS.

Software level enhancements for OBS

  • Increasing OBS fps can help. If game is dipping below FPS, you overdid it.

  • If your Capture FPS is dipping on the detection tab of CpHook, lower ROI and JPEG quality from Tools -> Scripts. 128x128 to 640x640 is the recommended range for ROI, 60-90 is the recommended range for JPEG quality.

  • Enable FULL DUPLEX mode on your network adapter. (Control Panel -> Network and sharing centre -> Change adapter settings (on the left) -> Double click on your NIC (realtek or intel or whatever is the main one) -> Properties -> Configure -> Advanced -> Scroll to Speed & Duplex -> Maximum (2.5 Gbps Full Duplex (or 1 Gbps depending on your network card).

Hardware level enhancements for Capture Card

  • PCIE Capture Cards - Make sure your Cheat PC has a PcieX4 / PcieX16 slot that is not sharing bandwidth with GPU and is not a low speed limited slot.

  • USB Capture Cards - Make sure your USB cable is the original one from the capture card manufacturer and make sure it is plugged to a 3.0 or 3.1 port on the Cheat PC has high bandwidth.

  • Make sure your HDMI cables are of good quality and ≥ HDMI 2.1.

Software level enhancements for Capture Card

  • Download your capture cards software. Elgato - 4k Capture Utility, Avermedia, AssistCentralPro. Check the manual / website if it is another brand.

  • Make sure it is running at the maximum hz it supports from Game PC -> Display Settings. (1920x1080@240 recommended)

  • Disable HDR and all that bs. Color filters on Game PC will also harm performance.

Cheat PC Enhancements

  • Smaller capture sizes are easier to process, Lower capture size if you have a high inference MS.

  • We have an 'advanced precision model' on the menu you can load. That will take a few more MS for more accuracy. personal preference. Disable if you have a high inference MS.

  • If you are on a LAPTOP make sure Windows power mode is on PERFORMANCE. power saving mode will kill your speeds. Make sure it is plugged in.

  • If your game of choice supports purple outlines you MUST use purple outlines for good performance. That's what we train our AI on. Ideally also turn off corpses and blood and make sure your settings make the outlines stand out.

  • Ideally use a small crosshair. Dot crosshair recommended.

Last updated

Was this helpful?